"Jet-Thruster™ offers a modern High-Tech solution to conventional thruster systems, at a surprisingly affordable cost"

customer statement

Simple and fast installation
A Jet-Thruster system can be installed in any boat without causing unwanted turbulence or cavitation. The installation process is minimally invasive and in most cases does not even involve fiberglass work.

All materials used in the manufacturing of our components are selected for their highest resistance to corrosion, ensuring that our systems will provide years of trouble free operation.

Jet-Thrusters are available for hulls made from wood, fiberglass, aluminum and steel.
Stacks Image 57
Stacks Image 33
Stacks Image 61
Find the perfect Thruster for your boat

The operation of the Jet Thruster is based on the sucking in of outside water. It is subsequently expelled through nozzles in the bow side. To this end the Jet Thruster has been fitted with a powerful centrifugal pump, a three-way valve and electrical controls. Because the Jet Thruster does not use a propeller, no disturbing cavitation sound is produced.
Stacks Image 13
Bow Thrusters can be installed even in boats with extremely shallow draft. While it is important that the pump is positioned below the waterline, the jets can be as far forward in the bow section as possible to provide the highest efficiency. Nozzles should be installed about 3" below the waterline.
Stacks Image 19
Some boats may already be equipped with a bow thruster but you realize that it would be beneficial to have more control over the stern movement. We have the perfect Jet-Thruster for your boat. You will be amazed at how our system makes maneuvering in tight spots a breeze.
Stacks Image 23
Depending on the hull geometry and the propulsion of your boat, you may consider the installation of a Combi-Thruster. After all, with just one single pump, you can upgrade your boat to effortless sideways-docking-capability. Then just add the new wireless remote control and you have full control at your fingertip.
Please let our technical team help you to find the best solution for your specific application.
Contact information
EXSOLTEC Marine is located in Apollo Beach, Florida and is the only authorized distributor in the southern U.S. for Jet-Thruster™ / Holland Marine Parts™ products.


1485 Apollo Beach Blvd.
Apollo Beach, FL 33572

Ph + 1 (813) 682-1700
E-mail: info@exsoltec.com

Terms and Conditions

Other information:
All our products are manufactured in compliance with CE regulations. We reserve the rights to change descriptions, graphs or statements, which are required for technical development of our Jet-Thruster systems.


Jet-Thruster™ is developed and manufactured by Holland Marine Parts and proudly presented in the USA by EXSOLTEC Marine.